Wiring Guide

2003–2006 Silverado/Sierra Towing Mirrors — Standard Wiring Guide

Use this wiring guide with the configuration listed for this product. Compare the connector layout and wire codes with your mirror before making any connections.

2003–2006 Silverado/Sierra Sequential Switchback towing mirror in Matte Black with white running light #color_Matte Black

Before You Install

Disconnect the negative battery terminal before wiring. Match the Driver Side and Passenger Side sections, connector type and wire codes to your mirror. Do not force a plug or rely on wire color alone. If the connector or functions differ, stop and contact support@nocvola.com with your vehicle year, product configuration and connector photos.

Configuration: Standard. Select by the variant's Light option. Product: chevrolet-silverado-gmc-sierra-2003-2006-towing-mirrors. Source sections: 2003-2007 Chevy Silverado/GMC Sierra Standard (Passenger Side) | 2003-2007 Chevy Silverado/GMC Sierra Standard (Driver Side). Match the selected Light option before wiring.

Driver side connector wiring diagram

Driver Side

ConnectorFunctionWire References
2P Out Plug Backup Light
Gray wire, GY GY − White wire, WH WH +
Blue Plug Heating
Black wire, BK BK − Black wire, BK BK +
Blue Plug Turn Signal Light
Black wire with white tracer, BK/WH BK/WH − Blue wire, BU BU +
Black Plug Heating
Black wire, BK BK − Black wire, BK BK +
Black Plug Mirror Up/Down
Green wire, GN GN Yellow wire, YE YE
Black Plug Mirror Left/Right
Green wire, GN GN Red wire, RD RD
Passenger side connector wiring diagram

Passenger Side

ConnectorFunctionWire References
2P Out Plug Backup Light
Gray wire, GY GY − White wire, WH WH +
Blue Plug Heating
Black wire, BK BK − Black wire, BK BK +
Blue Plug Mirror Up/Down
Green wire, GN GN Yellow wire, YE YE
Blue Plug Mirror Left/Right
Green wire, GN GN Red wire, RD RD
Blue Plug Turn Signal Light
Black wire with white tracer, BK/WH BK/WH − Blue wire, BU BU +
Black Plug Turn Signal Light
Black wire with white tracer, BK/WH BK/WH − Blue wire, BU BU +

Function Check

After reconnecting the battery, test the applicable functions below before reassembly. Test only features included in the selected mirror configuration and supported by the original vehicle equipment.

• Mirror adjustment: Test both Up/Down and Left/Right adjustment on the Driver and Passenger mirrors.
• Heating: Turn on the mirror defrost/heated-glass function and confirm the mirror heats normally.
• Turn signal: Test the left and right turn signals and confirm the corresponding mirror indicator flashes correctly.
• Backup light: With the vehicle safely secured and the area behind it clear, select Reverse and confirm the mirror backup light illuminates.