Wiring Guide

2007–2013 Silverado/Sierra New Style Towing Mirrors — Sequential Switchback / Power Fold Wiring Guide

Use this wiring guide with the exact configuration listed for this product. Compare the connector layout and wire codes with your mirror before making any connections.

2007–2013 Silverado/Sierra New Style Sequential Switchback towing mirror in Matte Black with white running light #color_Matte Black

Before You Install

Disconnect the negative battery terminal before wiring. Match the Driver Side and Passenger Side sections, connector type, wire codes and selected product configuration to your mirror. Do not force a plug or rely on wire color alone. Use only the rows for features fitted to your mirror; a listed feature is not added to a configuration that does not include it. If the connector or functions differ, stop and contact support@nocvola.com with your vehicle year, product configuration and connector photos.

Applies only to Sequential Switchback light with Power Fold for the linked New Style product. This guide does not cover Sequential Switchback / Manual configurations. Source: 2007–2014 Chevy Silverado/GMC Sierra Switchback Power-Fold.

Driver side connector wiring diagram

Driver Side

ConnectorFunctionWire References
2P Out Plug Backup Light
Black wire with white tracer, BK/WH BK/WH − White wire, WH WH +
2P Out Plug Running Light
Black wire with white tracer, BK/WH BK/WH − Blue wire, BU BU +
Black Plug Heating
Black wire, BK BK − Black wire, BK BK +
Black Plug Mirror Up/Down
Green wire, GN GN Yellow wire, YE YE
Black Plug Mirror Left/Right
Green wire, GN GN Red wire, RD RD
Black Plug Turn Signal Light
Black wire with white tracer, BK/WH BK/WH − Red wire with yellow tracer, RD/YE RD/YE +
White Plug Power Fold
Blue wire with white tracer, BU/WH BU/WH Green wire with white tracer, GN/WH GN/WH
Passenger side connector wiring diagram

Passenger Side

ConnectorFunctionWire References
2P Out Plug Backup Light
Black wire with white tracer, BK/WH BK/WH − White wire, WH WH +
2P Out Plug Running Light
Black wire with white tracer, BK/WH BK/WH − Blue wire, BU BU +
Black Plug Heating
Black wire, BK BK − Black wire, BK BK +
Black Plug Mirror Up/Down
Green wire, GN GN Yellow wire, YE YE
Black Plug Mirror Left/Right
Green wire, GN GN Red wire, RD RD
Black Plug Turn Signal Light
Black wire with white tracer, BK/WH BK/WH − Red wire with yellow tracer, RD/YE RD/YE +
White Plug Power Fold
Blue wire with white tracer, BU/WH BU/WH Green wire with white tracer, GN/WH GN/WH

Function Check

After reconnecting the battery, test the applicable functions below before reassembly. Test only features included in the selected mirror configuration and supported by the original vehicle equipment.

• Mirror adjustment: Test both Up/Down and Left/Right adjustment on the Driver and Passenger mirrors.
• Heating: Turn on the mirror defrost/heated-glass function and confirm the mirror heats normally.
• Turn signal: Test the left and right turn signals and confirm the corresponding mirror indicator flashes correctly.
• Running light: Turn on the vehicle running lights and confirm the mirror running light illuminates correctly.
• Backup light: With the vehicle safely secured and the area behind it clear, select Reverse and confirm the mirror backup light illuminates.
• Power Fold — only if fitted: Test powered folding using the vehicle’s control. Never fold a power-folding mirror by hand.