Wiring Guide

2021–2026 Ford F-150 Towing Mirrors Wiring Guide

Use this wiring guide with the configuration listed for this product. Compare the connector layout and wire codes with your mirror before making any connections.

2021–2026 Ford F-150 Sequential Switchback towing mirror in Matte Black with white running light

Before You Install

Disconnect the negative battery terminal before wiring. Match the Driver Side and Passenger Side sections, connector type and wire codes to your mirror. Do not force a plug or rely on wire color alone. If the connector or functions differ, stop and contact support@nocvola.com with your vehicle year, product configuration and connector photos.

Use this guide for the Driver Side and Passenger Side sections of the linked product.

Driver side connector wiring diagram

Driver Side

ConnectorFunctionWire References
3P Out Plug Turn Signal Light
Black wire with white tracer, BK/WH BK/WH − Red wire with yellow tracer, RD/YE RD/YE +
3P Out Plug Running Light
Black wire with white tracer, BK/WH BK/WH − Blue wire, BU BU +
3P Out Plug Spot Light
Black wire with white tracer, BK/WH BK/WH − White wire, WH WH +
22P Plug Heating
Black wire, BK BK − Gray wire, GY GY +
22P Plug Turn Signal Light
Black wire with white tracer, BK/WH BK/WH − Red wire with yellow tracer, RD/YE RD/YE +
22P Plug Running Light
Black wire with white tracer, BK/WH BK/WH − Blue wire, BU BU +
22P Plug Puddle Light
Black wire, BK BK − Brown wire, BN BN +
22P Plug Spot Light
Black wire with white tracer, BK/WH BK/WH − White wire, WH WH +
22P Plug Mirror Up/Down
Green wire, GN GN Yellow wire, YE YE
22P Plug Mirror Left/Right
Green wire, GN GN Red wire, RD RD
22P Plug Blind Spot Detection
Black wire, BK BK − Violet wire, VT VT +
Passenger side connector wiring diagram

Passenger Side

ConnectorFunctionWire References
3P Out Plug Turn Signal Light
Black wire with white tracer, BK/WH BK/WH − Red wire with yellow tracer, RD/YE RD/YE +
3P Out Plug Running Light
Black wire with white tracer, BK/WH BK/WH − Blue wire, BU BU +
3P Out Plug Spot Light
Black wire with white tracer, BK/WH BK/WH − White wire, WH WH +
22P Plug Heating
Black wire, BK BK − Gray wire, GY GY +
22P Plug Turn Signal Light
Black wire with white tracer, BK/WH BK/WH − Red wire with yellow tracer, RD/YE RD/YE +
22P Plug Running Light
Black wire with white tracer, BK/WH BK/WH − Blue wire, BU BU +
22P Plug Puddle Light
Black wire, BK BK − Brown wire, BN BN +
22P Plug Spot Light
Black wire with white tracer, BK/WH BK/WH − White wire, WH WH +
22P Plug Mirror Up/Down
Green wire, GN GN Yellow wire, YE YE
22P Plug Mirror Left/Right
Green wire, GN GN Red wire, RD RD
22P Plug Blind Spot Detection
Black wire, BK BK − Violet wire, VT VT +
22P Plug Temp Sensor
Pink wire with black tracer, PK/BK PK/BK Brown wire with white tracer, BN/WH BN/WH

Function Check

After reconnecting the battery, test the applicable functions below before reassembly. Test only features included in the selected mirror configuration and supported by the original vehicle equipment.

• Mirror adjustment: Test both Up/Down and Left/Right adjustment on the Driver and Passenger mirrors.
• Heating: Turn on the mirror defrost/heated-glass function and confirm the mirror heats normally.
• Turn signal: Test the left and right turn signals and confirm the corresponding mirror indicator flashes correctly.
• Running light: Turn on the vehicle running lights and confirm the mirror running light illuminates correctly.
• Puddle light: Activate the puddle light using the vehicle’s normal entry/lighting controls and confirm it illuminates.
• Spotlight: Activate the spotlight using the vehicle’s applicable controls and confirm it illuminates.
• Temperature sensor: Confirm the vehicle’s outside-temperature reading displays normally where supported by the original vehicle equipment.
• Blind-spot detection: If equipped, verify the mirror’s blind-spot indicator responds under suitable driving conditions. This is an indicator only, not automatic braking or steering.