Wiring Guide

2009–2018 Ram Standard Style Towing Mirrors Wiring Guide

The Ram 09–18 Square Style, Standard Style and GM Style exterior designs share a common vehicle-side wiring architecture. Match the connector, style and functions fitted to your exact mirror before making any connections.

2009–2018 Ram Standard Style towing mirror in Matte Black with amber turn signal

Before You Install

Disconnect the negative battery terminal before wiring. Match the Driver Side and Passenger Side sections, connector type, wire codes and selected product configuration to your mirror. Use only the rows for the features and light configuration fitted to your mirror. Running lights, backup lights and Power Fold are not added to a configuration that does not include them. Do not force a plug or rely on wire color alone. If the connector or functions differ, stop and contact support@nocvola.com with your vehicle year, product configuration and connector photos.

Shared Ram 09–18 family wiring reference for the linked Standard Style product. The Standard Style exterior shares the common vehicle-side wiring architecture with Square Style and GM Style; this Entry is bound to the Standard Style Product, not to Square Style. Its configuration-specific 2P Running Light and Puddle Light rows are preserved. Use only the rows for the mirror’s actual configuration. Configuration-dependent Running Light, Backup Light and Power Fold rows do not add those functions to a configuration that does not include them.

Driver side connector wiring diagram

Driver Side

ConnectorFunctionWire References
3P Out Plug Running Light
Black wire with white tracer, BK/WH BK/WH − Blue wire, BU BU +
White Plug Puddle Light
Pink wire, PK PK − Brown wire, BN BN +
Black Plug Heating
Pink wire with black tracer, PK/BK PK/BK − Black wire, BK BK +
Black Plug Turn Signal Light
Black wire with white tracer, BK/WH BK/WH − Red wire with yellow tracer, RD/YE RD/YE +
Black Plug Temp Sensor
Pink wire with black tracer, PK/BK PK/BK Brown wire with white tracer, BN/WH BN/WH
Black Plug Mirror Up/Down
Green wire, GN GN Yellow wire, YE YE
Black Plug Mirror Left/Right
Green wire, GN GN Red wire, RD RD
Black Plug Power Fold
Green wire with white tracer, GN/WH GN/WH Blue wire with white tracer, BU/WH BU/WH
3P Out Plug Backup Light
Gray wire, GY GY − White wire, WH WH +
Passenger side connector wiring diagram

Passenger Side

ConnectorFunctionWire References
3P Out Plug Running Light
Black wire with white tracer, BK/WH BK/WH − Blue wire, BU BU +
White Plug Puddle Light
Pink wire, PK PK − Brown wire, BN BN +
Black Plug Heating
Black wire, BK BK − Black wire, BK BK +
Black Plug Turn Signal Light
Black wire with white tracer, BK/WH BK/WH − Red wire with yellow tracer, RD/YE RD/YE +
Black Plug Mirror Up/Down
Green wire, GN GN Yellow wire, YE YE
Black Plug Mirror Left/Right
Green wire, GN GN Red wire, RD RD
Black Plug Power Fold
Green wire with white tracer, GN/WH GN/WH Blue wire with white tracer, BU/WH BU/WH
3P Out Plug Backup Light
Gray wire, GY GY − White wire, WH WH +

Function Check

After reconnecting the battery, test the applicable functions below before reassembly. Test only features included in the selected mirror configuration and supported by the original vehicle equipment.

• Mirror adjustment: Test both Up/Down and Left/Right adjustment on the Driver and Passenger mirrors.
• Heating: Turn on the mirror defrost/heated-glass function and confirm the mirror heats normally.
• Turn signal: Test the left and right turn signals and confirm the corresponding mirror indicator flashes correctly.
• Running light: Turn on the vehicle running lights and confirm the mirror running light illuminates correctly.
• Backup light: With the vehicle safely secured and the area behind it clear, select Reverse and confirm the mirror backup light illuminates.
• Puddle light: Activate the puddle light using the vehicle’s normal entry/lighting controls and confirm it illuminates.
• Power Fold — only if fitted: Test powered folding using the vehicle’s control. Never fold a power-folding mirror by hand.
• Temperature sensor: Confirm the vehicle’s outside-temperature reading displays normally where supported by the original vehicle equipment.